Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Rims

WTB TCS Rim Tape
$12.95 - $145.00
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
GSport Ribcage Rim
$174.99
The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389
Origin8 TA42
$42.99 - $51.99
- 42mm DEEP DISH sleeved and pinned rim - Powder coated (PC) or Anodized finish(Ano) dependent on color - Available with Machined or Non-Machined sidewall - 760g
Origin8 DAT-PRO-80 Fatbike Rim
$65.99
• Size: 26 x 4.0 • Double wall construction • Non-machined sidewall • Color: Black • Drilling: 32 or 36 • ERD: 534 • Width: 80mm • Depth: 24.5 • Weight: 1,310 grams (32-hole), 1,294 grams (36-hole)
Whisky Parts Co. No.9 Carbon 27.5+ Rim
$500.00
Whisky Parts Co. is at it again—pushing the category forward with the carbon No. 9 Rim. Far from just another wide, lightweight rim offering flotation and stability, No.9 sets the new standard for durability and tubeless reliability with hookless sidewalls and Whisky's new TBLS bead profile. These design features create a stronger and stiffer sidewall with more impact resistance, while making tubeless set-up simple. The proprietary shape and layup result is torsionally stiffer than single wall carbon offerings. These will have you rolling for years to come. - Engineered for disc brake only - Matte unidirectional carbon finish - 6k internal carbon fiber weave at spoke bed - Designed to be used with spoke washers - 30psi max tire pressure - Max tire is 3.8" - Rider weight limit: 300lbs
Origin8 AT-PRO801-UL
$76.99
- Model: AT-PRO801-UL - ISO: 559 - Width ID: 74 - Width OD: 80 - Profile: 23.5 - Wall: Sgl - Side: NMSW - Valve: PV - Weight: 1078g - ERD: 536 - Tire Compatibility: Tube Only
Origin8 Bolt Alloy Cross Rim
$55.99 - $99.99
- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Available in 2 profile options - Tubeless ready - Disc brake only - Sleeved joint - ISO-Road certified Specs: - ISO: 622 - Wall: Dbl - Side: Disc - Valve: Pv - Tire Compatibility: Tubeless Compatible High Profile: - Width ID: 19 - Width OD: 22.6 - Profile: 30 - Weight: 400g - ERD: 577 Low Profile: - Width ID: 17 - Width OD: 22.3 - Profile: 22 - Weight: 410 - ERD: 594
Origin8 Bolt Carbon Cross Rim
$550.99 - $572.99
- Unidirectional Toray T700 carbon fiber construction - Reinforced nipple bed with directional drilling - Titanium reinforced bead hook - Available in 2 profile options - Tubeless ready - Disc brake only - ISO-Road certified - ISO: 622 - Width ID: 17.5 - Width OD: 25 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Profile: 50 - Weight: 500g - ERD: 545 Low Profile: - Profile: 38 - Weight: 460g - ERD: 569
Origin8 Bolt Carbon Asym Gravel Rim
$572.99
- Unidirectional Toray T700 carbon fiber construction - Asymmetrical rim profile - Reinforced nipple bed with directional drilling - Titanium reinforced bead hook - Tubeless ready - Disc brake only - ISO-Mountain certified - ISO: 622 - Width ID: 21 - Width OD: 29 - Profile: 28 - Wall: Dbl - Side: Disc - Valve: PV - Weight: 395g - ERD: 589 - Tire Compatibility: Tubeless Compatible
Origin8 Bolt Carbon Road Disc Rim
$550.99 - $572.99
- Unidirectional Toray T700 carbon fiber construction - Reinforced nipple bed with directional drilling - Titanium reinforced bead hook - Available in 2 profile options - Tubeless ready - Disc brake only - ISO-Road certified - ISO: 622 - Width ID: 17.5 - Width OD: 25 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Profile: 50 - Weight: 500g - ERD: 545 Low Profile: - Profile: 38 - Weight: 460g - ERD: 569
Race Face Arc Rims
$115.99
A wheelbuilder's favorite the world over, now available from Race Face. This welded, tubeless-ready workhorse is the go-to rim for XC to aggressive all-mountain with a range of rim widths to suit every riding style. - Aluminum 6061 rim and welded seam for excellent strength with minimum weight - Tubeless ready with strong tire retention bead - Weights for 27.5" 425g (24mm), 475g (27mm), 490g (30mm), 540g (35mm), 595g (40mm), 650g (45mm) - Weights for 29" 455g (24mm), 515g (27mm), 535g (30mm), 578g (35mm), 633g (40mm), 690g (45mm) - Tubeless kit sold separately - Decal kits sold separately
Whisky Parts Co. No. 9 Carbon 36w 27.5-inch Rim
$450.00
Whisky's No.9 36w rims are their choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires, and offer lightweight performance across the board. These highly-versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims Whisky makes, these come with tubeless valves and tape required in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
Race Face AR Offset 29-inch Rim
$64.99 - $69.99
Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead
Origin8 Track Attack Rims (700c/36-hole)
$40.99 - $42.99
Origin-8's Track Attack Rims are 42mm-deep and made of light and durable aluminum sleeved and pinned for strength.
Origin8 DAT-PRO-65 Fatbike Rim
$65.99
• Size: 26 x 4.0 • Double wall construction • Non-machined sidewall • Color: Black • Drilling: 32 or 36 • Width: 65mm • Depth: 21mm
Velocity Aileron 700c Disc Rim
$126.99
- Tubeless compatible US made aluminum disc-only rim with a 25mm wide aero profile - Specifically tuned to be aerodynamically paired with 23-28c road tires, though a 20mm inner width compliments even the most voluminous gravel and cyclocross tires - Tubeless ready using 24mm Velotape
Surly Rabbit Hole Rim
$115.00 - $135.00
Surly's 50mm wide Rabbit Hole Rim lets you build a wheel that accepts a tire with a large footprint for outstanding control, and traction. This anodized-aluminum hoop has 64 spoke holes and can be built centered or offset. Also, material has been removed everywhere possible (without affecting strength) to keep the rim as light as possible for quick acceleration.
Origin8 Bolt Carbon MTB Rim 27.5-inch
$550.99 - $594.99
- Unidirectional Toray T700 carbon fiber construction - Available in multiple widths for Cross Country, All Mountain, and Downhill applications - Reinforced nipple bed with directional drilling - Hookless bead design - Tubeless ready - Disc brake only - ISO-Mountain certified - ISO: 584 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible All Mountain: - Profile: 29 - Width ID: 27 - Width OD: 32 - Weight: 410g - ERD: 541 Downhill: - Width ID: 32 - Width OD: 37 - Profile: 31 - Weight: 450g - ERD: 545 Cross Country: - Width ID: 24 - Width OD: 30 - Profile: 26 - Weight: 370g - ERD: 550
Origin8 Bolt Carbon MTB+ Rim
$616.99 - $638.99
- Unidirectional Toray T700 carbon fiber construction - Reinforced nipple bed with directional drilling - Hookless bead design - Tubeless ready - Disc brake only - ISO-Mountian certified - ISO: 584 - Profile: 25 - Wall: Dbl - Side: Disc - Valve: PV - ERD: 552 - Tire Compatibility: Tubeless Compatible 42mm Width: - Width ID: 36 - Width OD: 42 - Weight: 450g 52mm Width: - Width ID: 46 - Width OD: 52 - Weight: 480g
Origin8 Bolt Carbon Road Rim
$549.99 - $579.99
- Unidirectional Toray T700 carbon fiber construction - 255C high TG epoxy resin and Basalt braking surface withstands extreme temperatures - Reinforced nipple bed with directional drilling - Titanium reinforced bead hook - Available in 2 profile options - Tubeless ready - ISO-Road certified - ISO: 622 - Width ID: 17.5 - Width OD: 25 - Wall: Dbl - Side: MSW - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Profile: 50 - Weight: 500g - ERD: 545 Low Profile: - Profile: 38 - Weight: 460g - ERD: 569
Surly My Other Brother Darryl
$150.00
My Other Brother Darryl is a single-wall constructed, 80mm wide rim. 80mm wide rims give you a bigger footprint than that of narrower rims, which means more floatation and more traction. To initiate tubeless sequence, you just need a no-stretch rim strip and bead-to-bead tubeless rim tape. My Other Brother Darryl comes with either a 32 hole, symmetric wheel lacing spoke hole pattern or the tried and true 64 dual spoke hole pattern that allows for symmetric or offset wheelbuilds. It's got plenty of cutouts to keep the weight down and help your tires float through the squishiest of terrain. - Wheel Size: 26 - Hub Compatibility: 32h - ETRTO*: 559mm - Weight: 710g (Symmetric) 740g (Dual) - Color: Black or polished silver *Tire bead seat diameter.
WTB KOM Light 26-inch
$99.95
WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we’ve ever made. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area
Whisky Parts Co. Whisky No.9 40w Carbon Tubeless 27.5
$450.00
40w rims are the choice for the truly big tires out there. Providing ample support for high volume, modern mountain bike and plus tires, 40w’s are a great compromise between width, weight, and stiffness. If you’re looking to up the game on your big-tired mountain bike, these are a great place to start a build. As with all Whisky rims, these include the tubeless valves and tape required in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs - 50psi max tire pressure
Race Face ARC 29-inch Carbon Rims
$499.99
Stiffer, stronger, and ready to party, ARC 31 Carbon Rims take notes from Race Face's Next R carbon wheelset; built to handle the most challenging days on the trail. With one of the lightest enduro rims on the market, you can tackle the climbs with speed while you hit the descents with confidence. The ARC 31 have been redesigned to take full advantage of the benefits carbon fiber has to offer. Featuring a generous 31mm internal width for modern tire widths with lower pressures. Lace these rims to your favorite hub and you’ve got a world-class wheelset ready for action.
Sun Ringle Mulefut 50 SL Rim
$99.99
Proven oversized rim performance with Sunringlé lightweight durability, the same durability that’s synonymous with the Sunringlé name. - 6061 series alloy. - Premium matte black sand blasted finish - Optimized lightening holes for reduce weight - Currently the lightest aluminum rim on the market - 27.5+ and 29+
Sun Ringle Mulefut 80 SL Rim
$149.99
In the Midwestern United States, Fat Bike traffic rivals automobile traffic. Let’s face it, the wheels on these rigs are purpose built. Purposeful pigs of a wheel size. Steadfast, durable, ramble over anything wheels! So we named our new 80mm wheel after the most bad ass pig on the planet. The Mulefüt. Wide enough to handle a sizable tire patch, with strategic cut-outs to reduce overall weight. Ramble on! Product specs: - 830g - Outer rim width: 80mm - Inner rim width: 74.4mm - Size: 26in (559) - Pinned - Str tubeless ready - Disc only - Hole count: 32 (dual row) - Erd 551mm - Hole offset 19mm
WTB Asym 26-inch
$84.95
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High-end alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
WeThePeople Logic Rims
$40.99 - $64.99
The Logic rim uses a wider 35mm profile with a thick sidewall, which makes the rim strong and resilient to sideways impacts that can happen from anything between under-rotating a flair or over-rotating a hard 360 out of a rail. - Very strong reinforced spoke hole design - Extra-thick sidewalls to resist denting under harsh conditions
Whisky Parts Co. No.9 Fat Carbon 26-inch Rim (70mm)
$500.00
Trail riders, fatbike racers, and ultra-endurance athletes looking to add a refined, lightweight, tubeless wheelset to their fat bikes need look no further than Whisky's No.9 70w rim. While it’s optimized for use with 3.8–4.6-inch tires, it’s compatible with tires up to 5.05-inches wide. It utilizes a double-wall construction to ensure a sturdy, stout rim profile that maximizes cornering stability. With an inner width of 65mm, fat tires mimic the look and feel of traditional mountain bike tires when mounted to the 70w. That combo offers unmatched trail-attacking traction with a confidence-boosting wide footprint, making it one of the most versatile fat rims on the market.
WTB KOM Light 27.5-inch
$94.95 - $99.95
WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we’ve ever made. Available in widths ranging from i23 to i45, because all bikes should benefit from lightweight rims. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area
Page 1 of 4 Next page