The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. Your car's rails are fully protected thanks to the integrated rubber lining. You also get maximum rack strength and a custom fit from the tooless, rubber-coated steel straps.
Finally, an upright-bike carrier that’s easy to install and won’t damage your car! SeaSucker's Talon bike rack features their incredibly strong vacuum mounts allowing you to temporarily and securely mount your bike to the roof or trunk without the hassle of permanently attaching any hardware. SeaSuckers are non-marking, UV- and weather-resistant, and hold exceptionally well to glass, metal or fiberglass surfaces. They're made of 1/2-inch high-density polyethylene, which is tough and strong enough to hold your bike and flexible enough to follow the curve of your roof line. The Talon holds your bike with their heavy-duty Delta Bike Hitch Pro fork mount. It opens wide enough when you release the lever that you don’t have to tighten or loosen the acorn nut on the opposite side every time you put your bike in or take your bike out of the mount. Plus, the Delta locks, too. For the back of your bike, and to keep the tail from sliding left or right, there's another SeaSucker vacuum mount with a 6-inch, hook-and-loop Rear Wheel Strap. The Talon attaches to your car via 3 6-inch diameter SeaSucker vacuum mounts (210 pound-rated pull strength each). It's designed to mount to your roof and front windshield, but can be used just about anywhere – on the roof, on the trunk, etc.
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
- Durable construction for long lasting use - Made from water resistant nylon to help keep contents dry - Easy to attach to roof racks or raised side rails - Fits SportRack Roof Rack Systems, side rails, square, round and most factory racks Medium - 13 cubic feet of cargo 35"(l) x 35"(w) x 18"(h) Large - 15 cubic feet of cargo 37"(l) x 37"(w) x 18" (h)
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Fitting kit required for perfect fit of the roof rack to a specific car.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches or more
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24 inches or more
Traverse fitting kit required for perfect fit of the roof rack to a specific car. Compatible with Thule Traverse 480 and 480R Feet only.
Got a Texas-sized SUV equipped with Yakima's LoadWarrior rooftop carrier? Then you may need Yakima's LoadWarrior Extension. It's constructed of heavy-duty, weather-resistant steel and it adds 18 inches and 40% more carrying capacity to Yakima's LoadWarrior rooftop basket (sold separately).
The first load-assist mount to handle both SUPs and kayaks makes loading and unloading heavy boats and boards a breeze. The lightweight mount tilts down more than two feet from the roof rack, takes on up to 45% of the boat’s weight, then helps gently raise it up to the top of the vehicle. Once loaded, it securely cradles your boat or boards for the ride. At only 21 pounds, it’s super lightweight but built burly enough to wrangle an 80 pound load. Product details: - Easily load and unload kayaks and boards at waist level at the side of the vehicle with the easy to use slide and tilt mechanism - 80 lb. boat and board capacity easily handles a large kayak or two boards - Universal mounting hardware fits most roof racks - Lightweight materials and construction don’t eat up roof’s carrying capacity - Tilts down a lengthy 26" from roof rack height - Provides 30-45% weight assistance (depending on boat width) - Felt-covered cradles flex to conform to hull for secure transport - Folds down flat to reduce drag and noise when not in use - All tie-down straps included - Locks to base rack with SKS Lock Cores for added security (sold separately)
- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
This premium carrier basket combines exclusive design with high quality materials. Its multiple integrated and innovative functions are intuitive to use and provide an incredibly versatile platform for adventure.
Kuat's Vagabond lets you carry all your gear everywhere the wind blows you. This versatile basket features two fork-mounted bike racks and a massive amount of cargo space. It includes a fairing and all the hardware you need to mount to most factory and aftermarket crossbars. Features • 2 Bike Capacity (40 lb bikes) • Flat Black Powder Finish • Fairing included • Mounts to all factory & aftermarket cross bars • Skewer mounts integrated from factory (9mm skewer only) • 160 lb. capacity with bikes & gear • Up to 3 feet between cross bars. • Max crossbar size: 4.5" x 1.75" (width x height) • Weight: 26 lbs • Outside dims: 52.5" x 44" x 5" • Inside dims: 45.5" x 41.5" x 3.75"
Transport you kayak safely with these custom designed saddles that conform to the most popular hull shapes. - Integrated rubber pads protect the hull and help hold the kayak in place for transportation - Carries 1 kayak and requires 1 person to load and unload - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
A versatile, horizontal kayak carrier with large cushioned, flexible pads that conform to a large range of hull shapes as well as SUPs. - Protects the hull with large, flexible, cushioned pads - Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets - Accommodates kayaks and SUPs up to 36 in/90 cm wide and 85 lbs/40 kg - Easily secure the kayak or SUP using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs - Can carry a variety of hull shapes as well as SUPs with two independent pivoting saddles with angle-setting lever
Add even more cargo space to your pickup with Thule's Xsporter Pro Multi-Height Aluminum Truck Rack. This system attaches to the sides of the pickup bed, creating a whole other level of gear storage and rack options. Superior aerodynamics reduce drag and improve your fuel efficiency while Thule's WindDiffuser technology offers super quiet on-the-road performance. All-aluminum construction resists rust and provides high strength, so you'll get a lifetime of hard use out of this rack. The system also includes four matching lock cylinders to secure your gear.
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
When it comes to roof-mounted bike trays, Thule leads the pack. Their Paceline Fork Mount Carrier simplifies loading and unloading your bike. The one-handed closure automatically adjusts to different dropout thicknesses and optimizes clamping pressure to prevent damage to your fork from over-clamping. Its ratcheting rear-wheel strap and high-sided wheel cradle keep the rear of the bike in place while you're driving to and from your ride. There's even space for a One-Key lock cylinder (sold separately) to keep your faithful steed safe and secure. This carrier fits all Thule rack systems, third-party round bars, and most car company's factory racks.
Includes all the functionality of the Vagabond to get your bikes and gear on the road with ease, and we dare you to find a better-looking roof basket on the market. A bit showier than the original, the Vagabond X features locking mounts. - Locking mounts provided - 2 integrated 9mm front skewer mounts - 160lb Load capacity - 2 Bike - 50 lb max for each - Silver decals on front and side - Ability to add extension (Xtender) making the rack 73" long - 41" x 52" x 7" - Mounts to most factory and aftermarket roof bars
$129.95 - $139.95
The sleekest bike rack ever to rip down I-70. RockyMounts JetLine is a highly crafted fork mount with a low profile and streamlined aluminum head and tray, designed to fit Slotted Crossbars (RockyMounts Ouray, Thule AeroBlade, Yakima Whispbar and JetStream, Rhino Rack Vortex, factory bars from Audi, BMW, Mercedes, Mini, Volvo, VW), Thule Square Crossbars, and Yakima Round Crossbars. The JetLine will hold bikes with a quick-release front wheel and holds skinny road tires up to 2.7-inch mountain bike tires. The simple, long-throw quick-release function allows easy bike loading and unloading. JetLine is compatible with disc and standard brake systems. Lock rack to car and bike to rack with RockyMounts lock cores and keys (sold separately—requires a 2-pack).
The RockyMounts Tomahawk low-profile upright mount that's easy to use and even easier on your wallet. Fat-bike ready out of the box (up to 5" tires), and will hold all styles of bikes, road, mountain, cruiser, and childrens (20 - 29" wheels). Features: - No bike frame contact - simply ratchet the hook over the front wheel and secure the front/rear wheelstraps - Fat bike ready (up to 5" tires) out of the box. Includes two wheel strap extensions - Swingarm easily adjusts for driver side and passenger side installation - Mounts to all styles of crossbars - round, square, factory, aero - Holds all styles of bikes, 20 - 29" wheels (except those with front fenders) - New Easy-Load wheel straps make loading bikes easier than ever - Optional 2-pack locks (sold separately) lock rack to car and bike to rack
The RockyMounts SwitchHitter is the most versatile fork-mounted bike carrier ever created. It fits ALL styles of crossbars out of the box (T-Track hardware included for slotted bars), 9mm QR bikes, and thru-axle bikes (12x100, 15x100, "Boost" 15x110). It also features integrated, magnetized cable lock pulls out of the rear of the tray (lock cores not included–a 2-pack is recommended). Features - Fits Yakima round, Thule square, factory/aero, and slotted bars (with T-Track hardware) like RockyMounts Ouray, Thule AeroBlade, Yakima Whispbar, Yakima StreamLine, and Rhino Rack crossbars - Includes 12x100 axle, 15x100 axle, "Boost" 15x110 axle, and 9mm QR.
$499.95 - $599.95
Thule's premium Trail carrier basket combines exclusive design with high quality materials. Its multiple integrated and innovative functions are intuitive to use and provide an incredibly versatile platform for adventure. The Trail features a flat cargo area with eight adjustable tie-down loops to secure your gear. Thule's T-track channels are integrated into the front and rear of the rack to mount bike carriers, ski racks, and other accessories. The Trail mounts to all Thule rack systems, as well as round bars and most factory racks.
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Traverse fitting kit required for perfect fit of the roof rack to a specific car. Compatible with Thule Traverse 480 and 480R Feet only.
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to add Thule square crossbars. The feet mount without tools, are vinyl-coated to protect your vehicle, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how much gear you carry, and most are sealed from the elements to protect the internal mechanism.
Page 1 of 4 Next page