Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low profile - Replaces without tools
Replacement ratchet strap for all shoes with SL buckle closure. - Sold in pairs - 2011 D-Link replacement straps: Used on 2011-12 Pro Road and 2011-12 Pro MTB shoes with no screw attachment. - 2011 D-Link replacement straps. Used on Pro road and MTB shoes for 2011 - 2009 X-Link replacement straps: Used on 2009-10 Pro Road and 2009-10 Pro MTB shoes with Phillips head screw attachment. - 2009 X-Link replacement straps. Used on Pro road and MTB shoes from 2009 and 2010
Pearl Izumi's thinnest, lightest and most aerodynamic shoe cover is perfect for racing or riding in cool, windy conditions. It's made with a breathable P.R.O. Barrier Lite fabric that stretches to optimize your aero advantage while keeping your feet dry and comfortable. It also features a zippered rear closure for improved aerodynamics. Features: - P.R.O. Barrier Lite fabric provides lightweight wind protection and water resistance - Wind tunnel tested for aerodynamics - Zippered heel closure for improved fit and improved aerodynamics - Recommended for road shoes with external cleats - Upper: 50% nylon 40% polyurethane 10% elastane; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane; Imported
The classic must-have ELITE Thermal Toe Covers are updated with reflective logos. Features: ELITE Softshell provides superior wind and water protection Simple pull-on design Reflective elements for low–light visibility Recommended for road shoes with external cleats Top: 70% nylon, 15% spandex, 15% polyurethane, Bottom: 93% nylon, 7% spandex, Imported.
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. The Thermal Pro is Louis Garneau's warmest shoe cover that provides 360 degrees of customizable protection from the worst winter can bring. A seam-sealed 2 mm neoprene outer with a fleece-lined inner provides unparalleled warmth, a customizable under sole prevents anything from seeping up into your foot, and easy wide openings with waterproof zipper and covered zipper garage keep the fouls of winter weather at bay. - Under Sole: Durable pre-cut rubber sole for better water resistance - Side opening: Seam-sealed Hook and loop fastener with safety puller for easy slip on/off - Shoe Cover Visibility Features: HiViz 360 - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
• Replacement ratchet set for Louis Garneau's Monte shoes (sold separately) • 2 pieces
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
Replacement studs for Louis Garneau MTB and cyclocross shoes. Contains four 8mm-tall studs and a stud remover tool.
Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
Wear down the bottom of your shoes from too much cycling? The Toe and Heel Pad Set includes 4 pieces of rubber for a pair of your favorite Bont shoes along with screws to keep them in place.
Wore out the laces on your S-Works Sub6 shoes? Don't fret, Specialized has your replacement laces right here. Now lace 'em up and get riding.
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like Specialized's Element Windstopper Shoe Covers, history is doomed to repeat itself this winter. These shoe covers boast a universal cleat opening and visibility-enhancing reflective accents for winter's low-light riding conditions. - Gore WINDSTOPPER Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Rear zipper closure securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Designed for the nastiest, frigid conditions, the Pearl Izumi P.R.O. AmFIB WxB Shoe Covers transform your road shoes, allowing them to thrive year round. Primaloft Gold insulation and P.R.O. Barrier WxB fabric with an Outdry membrane provides waterproof, breathable coverage to keep feet toasty. Kevlar bottoms and rubber reinforcements on the toes add durability to the high-wear areas. The best part: Pearl's patented two-stage hook-and-loop closure makes these covers easy to put on and take off, while ensuring a snug fit against both your shoe and ankle. Features: - P.R.O. Barrier WxB powered by Outdry provides optimal water protection by bonding the waterproof, breathable membrane directly to the interior of the shell fabric - 100g Primaloft Gold insulation provides optimal warmth without bulk - Updated two-stage hook and loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - Kevlar road bottom spreads open for easy on and off while providing superior durability - Recommended for road shoes with external cleats - Reflective elements for low-light visibility - Shell: 100% polyester; Insulation: 100% polyester; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane
These 3mm stackers can easily correct the common issue of leg length inequality. - External cleat lift for addressing leg length inequality. - Shaped to fit SPD SL, Look KEO, and Speedplay pedals. - Includes longer screws. - Package includes two cleat stackers.
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
Replacement Ti/Alloy T-Nuts for the S-Works 6 and S-Works Sub6 road shoes.
Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements. - Rear Velcro closure.
Specialized's BG Footbeds were developed by biomechanical expert, Dr. Andy Pruitt of the Boulder Center For Sports Medicine. Their amazing, ergonomic shape increases power, endurance, and comfort, while optimizing hip, knee, and foot alignment. You'll be amazed how much nicer your shoes fit and feel! - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
• Replacement ratchet set for selected styles of Garneau's shoes • 2 pieces
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Stripped, worn-out—whatever happened to your three-hole cleat attachment is between you and your shoes…or maybe between your shoes and your cleats. Either way, Specialized has a T-Nut replacement kit that's easy to install and even easier than buying a new pair of shoes.
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
Your S-Works MTB shoes thanklessly accompany you through nature's muddiest, toughest conditions, so thank them and keep them ticking with Specialized's Replacement S-Works Mountain Shoe Lug Kit. These lugs replace the worn-out tread on your S-Works Mountain shoes. •Includes heel, ball, and toe pieces •Includes toe spikes •Sold in pairs; includes screws
If you lost or damaged the Warp Sleeve on S-Works Sub6 road shoes, you have no reason to fear—Specialized has the replacement. Pick up a pair and start saving those seconds again.
• Replacement ratchet tongue for selected styles of shoes • 2 pieces • 93mm
The in-between solution to protect your feet on those chilly days. FABRICS: -ISO LITE: Provides warmth in cool weather -ANTISLIP 3 MM NEOPRENE : Isolates from cold, provides warmth and durability DETAILS: -Cleat opening under sole -Flatlock seams: Enhanced comfort -Reflective puller
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
- 2 anti-slip platforms and 6 screws (4 x 17 mm) - Fit on all combined SPD and road outsoles - Convenient for stability and walking and are easy to clip on
Page 1 of 2 Next page