Accessories

- For maximum sweat absorption and sun protection - Micro mesh top allows heat to escape - One size, works great under helmets

A cycling skull cap can provide the ideal base layer for your head and with a fit that rests just above the ears, it will work perfectly for anyone who wears a helmet. Plus, this cycling skullcap dries 3-4 times faster than cotton. - 4-panel, beanie fit - Sits just above the ears - Eventure™ knit shell - Perfect under a helmet - One size fits most - Machine Washable; air-dry - Does not shrink

- Traditional style unmatched performance - Added a layer of protection from the sun and built-in moisture-wicking - Features soft bill that flips up or down elastic back - One size fits most - Machine washable

For the serious commuter, nothing beats the Jandd Ankle Strap. - Made from 1.5" hook-and-loop material - Meets SCUBA industry wet-strength requirements

- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo

This reflective yellow leg band with adjustable hook and loop closure secures loose pant legs to prevent chain catching. - Reliable hook and loop closure system works both wet and dry - Reflective yellow material for additional visibility - 1.25-inch width

This wide, adjustable leg band with adjustable hook and loop closure secures loose pant legs and prevents them from catching in the chain. - Reflective striping for additional visibility - Reliable hook and loop closure system works both wet and dry - Flexible material stretches for additional comfort - 2 3/8-inch width

- Made of 100% Polyester - UV- and water-resistant outer layer - Dust filter mid-layer - Antibacterial sweat-absorbent inner layer - Designed to be used with glasses - Reuse/wash up to 20 times - These are neither N95-certified nor FDA-approved

- Made of 100% Polyester - UV resistant outer layer - Water resistant - Designed to be used with glasses - Dust filter mid layer - Antibacterial sweat absorbent inner layer - Can be reused up to 20 times

- Flat peak 5 panel construction - 100% cotton - Webbing/buckle rear adjuster - One size - Embroidered Logo

- Lightweight Cotton Twill - 3-Panel Dome with Traditional Flip Up Visor - Ribbon Sewn Down Center and Visor - KoolFit Elastic Sweatband - Twill-Taped Inner Seams - Size: M/L 7 - 7 3/8 and XL 7 1/2 - 7 7/8

• Lightweight cotton twill cap with 3-panel dome, traditional flip up visor and ribbon sewn down center and visor • Koolfit elastic sweatband with twill-taped inner seams

The perfect hat to wear while wrenching on your bike. Black with an adjustable back strap with woven patch and embroidered Park Tool logo. - Mid profile fit. - One size fits all.

Mid-profile fit ball cap made of blue cotton with snapback closure. Embroidered front logo and Park Tool woven patch on back.

Upgrade your mechanic uniform with this fashionable 6-panel flat bill hat, featuring an embroidered "It's a Great Day to Fix a Bike" hexagonal patch. 100% cotton 6-panel. - Standard size: 58 cm circumference - Extra large size: 61 cm circumference

More fun, less sun. With increased UPF coverage and better durability, these updated sleeves give you up to UPF 50 even when stretched by 30 percent, delivering longer-lasting sun protection so you can safely pedal at the brightest times of day.  - In–R–Cool technology to provide optimal skin-cooling effect and moisture management when you perspire - ELITE Transfer fabric with UPF 50+ sun protection and Ice-fil - BioViz reflective elements for low-light visibility - Easy slip-on fit - 93% polyester  7% elastane - Technology: Ice-fil

Pearl Izumi's lightweight and cool Sun Sleeves provide superior UPF 50+ protection from ultraviolet rays and boast a lighter feel that allows using them in even warmer temperatures. They also have wider grippers for more comfort and that ensure they stay up when you are charging hard. • In–R–Cool technology optimizes skin–cooling effect and moisture management • Black colorway features ELITE Transfer fabric with In–R–Cool powered by Coldblack technology for optimal cooling and UPF 50+ sun protection by reflecting UV rays • White colorway features ELITE Transfer fabric with UPF 50+ Sun Protection and Ice-fil • Reflective elements for visibility

Arm warmers are likely the most essential cool weather cycling accessory, and for much of year you won't leave home without them either on or in your pockets. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in damp conditions. A BioViz logo near the elbow adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding PI Dry technology for all-weather performance - Anatomic left- and right-specific fit - Plush, wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Unisex sizing - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Imported

A good neck gaiter can insulate without looking like someone is wearing a Pomeranian. Ours employs Merino wool plated to polyester so that it is the perfect combination of soft, warm and dry, yet keeps bulk to a minimum. The construction is just snug enough that it can double as a hat. - Transfer Merino fabric combines wool and recycled polyester for sustainable technical performance. - Unique plated fabric construction places polyester next to skin and merino on the exterior for superior moisture transfer and thermal regulation. - Made using fine 18.5-micron Merino wool for superior comfort. - Recycled Repreve XS Polyester technical fibers are made from recycled plastic water bottles. - Tube design for multi-functional head or neck protection. - BioViz reflective elements for low-light visibility. - Wool Blend Performance certified by the Woolmark Company to ensure the highest quality product.

Proven to deliver UPF 50 protection even when the fabric is stretched by 30 percent, the lightweight material used for these slip-on knee covers will keep you covered and cool so you can lay down the hammer at the height of summer. - In–R–Cool technology to provide optimal skin-cooling effect and moisture management when you perspire - ELITE Transfer fabric with UPF 50+ sun protection and Ice-fil - BioViz reflective elements for low-light visibility - Easy slip-on fit - 93% polyester  7% elastane - Technology: Ice-fil

Transform any pair of cycling shorts into a knicker with these super-versatile knee warmers. A general rule is to keep knees covered up to 60 degrees, which means these warmers could see action all year long. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in wet conditions. A BioViz logo on the back of the calf adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding - PI Dry technology for all-weather performance made with anatomic construction eliminates bunching through your full range of motion - Plush, wide elastic binding with silicone gripper for a stay-up fit - Anatomic left- and right-specific fit - BioViz reflective elements for low-light visibility - Unisex sizing - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Made in Vietnam

An essential accessory for any level of rider, these leg warmers transform your shorts into much warmer full-length tights. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But, our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for puddle-charging splash resistance and more warmth in wet conditions. A BioViz logo on the back of the calf adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding PI Dry technology for all-weather performance - Anatomic construction eliminates bunching through your full range of motion - Plush, wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Zippered ankle for easy on-and-off - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Made in Vietnam

Planet Bike's Dasher Toe Covers are made of windproof fabric lined with microfleece to keep you warm. There are also elastic heel straps to keep them in place and reflective accents for safety.

Planet Bike's Comet Shoe Covers are made of neoprene for excellent water and wind resistance and warmth. Plus they have Velcro closures for easy on/off and reflective accents for safety.

For top comfort, Planet Bike's Blitzen Shoe Covers are made of windproof fabric lined with microfleece to keep you warm. They boast Velcro closures for easy on/off and reflective accents for safety.

This simple logo hat is a great way to keep the sun out of your eyes at outdoor industry events or cover up a bad case of helmet hair. - One Size - Adjustable

Add a pop of color to your Q logowear collection with this hat featuring an abstract rendering of our new logo. - One Size - Adjustable

Shield your neck and face from cold air, dust, or whatever else you’re up against on your rides and commutes. - Synthetic material - One size fits most - Matches Salsa Arctica jerseys, bottle, hats, and socks

A proper cycling cap keeps your eyes glare- and moisture-free. This one is designed to do just that, with a carefully measured amount of panache woven in. - Four-panel design - Matches Salsa Latitude jerseys, bib short, vest, gloves, socks, and bottles

Keep it fresh and simple with this Salsa logo hat. It’s a fitting piece for backyard gatherings, post-ride brewery visits, or nights around the fire after a day of bikepacking. - 6-Panel Structured Flat Bill Trucker - Mesh back - Snap closure - Raised 3D Embroidery