Brakes/Levers/Pads

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

- Box Two Replacement Brake Pads fit all Box cartridge brake shoes, as well as all other 70-millimeter cartridge brake pad holders - Replacing the pads takes just minutes and is as easy as removing the pin, sliding out the old pad, refitting the new pad and replacing the cotter pin - Made using a proprietary braking compound - Length of Pad: 70mm

The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension. Features: - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, stainless steel hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm - Includes Box Two Black Brake Housing and Stainless Steel Cable

- Melt forged aluminum construction - 95mm arm length - Dual tension adjusters - Front/Rear: Either - Includes 55mm pads - 179g each

Color: Red Pad Type: Replacement Insert - Cartridge Intended Brake Type: Caliper Pad Attachment Style: Bolt-In (Caliper) Rim Compatibility: Carbon

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

Compatibility: Shimano Deore (BR-M515, M475, M525, M465, M495) Auriga Comp, Aquila Clarks S2

- 6061-T6 alloy - Heat-treated and anodized finish - Adapts disc calipers to multiple applications

Compatibility: Aspe Artek / Zoom DB250, DB350, DB450, DB550 / Clarks Zoom Compound: Standard

The E-VRS (Semi-metallic) disc brake pads have a high carbon content for E-bike disc brakes. The pad compound is specifically suitable for E-bikes, having high brass/iron content for powerful braking performance. Packaged in bike sets of 2 pairs and clips. Compatibility: Tektro Dorado

The DT Swiss Center Lock adapter allows to mount a 6-hole disc brake on Center Lock hubs, suitable for road and MTB bikes equipped with a quickrelease or a through axle. The Hybrid version has a integrated magnet and is compatible with most standard speed sensors.

The DT Swiss Center Lock adapter allows to mount a 6-hole disc brake on Center Lock hubs, suitable for road and MTB bikes equipped with a quickrelease or a through axle. The Hybrid version has a integrated magnet and is compatible with most standard speed sensors.

These replacement brake pads are designed specifically for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Carbon fiber rim construction and design are only part of the solution to solving the heat equation. Brake pads play an integral role in ride performance and long-term durability of the wheel.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Our floating discs have been redesigned with a wider braking surface to enable them to be used as a replacement on many other braking systems in addition to our own FEATURES - Constructed in two parts, aluminium centre and stainless steel braking surface. - High performance disc, allowing the stainless steel outer to expand separately from the centre and handle high temperatures without warping. - Hope floating rotors have a true floating design which allows 1 degree of freedom. This means the outer is always free to expand when subjected to heat. - Lightweight design. - Aluminium centre acts as heat sink keeping disc temperatures lower. - CNC machined centre is stiff and lightweight so has the advantages of a thicker fixed disc without the weight penalty.

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

Jagwire's Mountain Pro Brake Pads are a nice upgrade for your linear-pull and cantilever brakes. They feature cartridge-style pads that are easily replaced when the time comes. And the pads are made of Jagwire's tried-and-true all-weather compound for excellent stopping and durability.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry-leading brake compounds for consistent, confident performance. - Jagwire Pro E-Bike pads feature a friction compound developed specifically for the unique needs of pedal-assist E-bikes - Tuned to provide more stopping power and durability than typical pads, with consistent modulation and little braking noise - Steel backing plate - Compatible with SRAM® Level Ultimate (B1), Level TLM (B1), Level TL, Level T, Level; DB5, DB3, DB1; Avid® Elixir R, CR, CR Mag,1, 3, 5, 7, 9, X0; XX, XX World Cup; Red eTap AXS HRD 2-Piece (2019+); Force eTap, AXS HRD; Rival eTap AXS HRD

Disc brake pads with industry-leading compounds for consistent and confident performance, designed to fit a variety of Shimano brakes. - Jagwire Pro E-Bike pads feature a friction compound developed specifically for the unique needs of pedal-assist E-bikes - Tuned to provide more stopping power and durability than typical pads, with consistent modulation and little braking noise - Steel backing plate - Compatible with Shimano Deore (T615, M525, M515), Alivio (M4050), Acera (M3050), Non-Series MT500, MT400, MT200, M575, M486, M485, M475, M465, M447, M446, M445, M416, M415, M395, M375, M365, M355, M315, UR300 - Compatible with TRP HY/RD (Post Mount), Hylex (Post Mount), Slate X2, Spyre, Spyke - Compatible with Tektro Aquila, Auriga, Dorado, Draco, Gemini, HD-E350, HD-E715, HD-M285, HD-M286, HD-T285, HDC330, Orion, Vela - Compatible with Promax F1, Solve, Lucid, Decode R, eCapsule, DSK-909

Disc brake pads with industry-leading compounds for consistent and confident performance, designed to fit a variety of Shimano brakes. - Jagwire Pro E-Bike pads feature a friction compound developed specifically for the unique needs of pedal-assist E-bikes - Tuned to provide more stopping power and durability than typical pads, with consistent modulation and little braking noise - Steel backing plate - Compatible with Shimano XTR (M9120), Saint (M820, M810), Deore XT (M8120, M8020), SLX (M7120), Deore (M6120), ZEE (M640), Non-Series (MT520, MT420) - Compatible with TRP Quadiem, G-Spec Quadiem, Slate T4, and G-Spec Slate - Compatible with Tektro Orion 4-piston calipers

Jagwire's Pro LR2 rotors are made to improve the performance of any disc brake-equipped bike. Utilizing a 2-piece construction design, the LR2 rotors have a stainless steel braking surface to provide quiet, consistent stopping power. The lightweight aluminum inner spider features an integrated concentric ring and reinforced rivet joints to resist warping and improve durability. - Stainless steel machined braking surface resists corrosion and is tuned to reduce braking noise - Aluminum spider helps keep weight to a minimum - Compatible with all popular disc brake pad compounds (organic/resin, metallic, and semi-metallic) - Available to fit on ISO 6-bolt or Center Lock hubs, Jagwire offers options for nearly any disc brake bike - 6-bolt rotors include T25 mounting hardware - NOTE: LR2 rotors are NOT compatible with brakes with pads extend that below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping