Filter By:
- Bar Ends (14)
- BMX (67)
- Bottom Brackets (239)
- Brakes/Levers/Pads (656)
- Cables (197)
- Cassettes/Freewheels (147)
- Chainrings (284)
- Chains (145)
- Show More Categories
- Cranksets (300)
- Derailleurs (184)
- Forks (170)
- Groups (27)
- Handlebar Grips/Tape (315)
- Handlebars (269)
- Headsets (176)
- Pedals (301)
- Saddles (325)
- Seatposts (114)
- Shift/Brake Combinations (76)
- Shifters (135)
- Shocks (28)
- Stems (161)
- Other (1818)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
Cannondale Headshok/Lefty Bearing
- 1-1/8" / 1-1/4", 45°/ 45° ACB
- Compatible with carbon or alloy head tubes
- For tapered 47mm / 52mm OD head tube
- For 1-1/8" to 1-1/4" tapered fork
- Alloy top cover
- Upper : 1-1/8" angular contact bearing black seal)
- Lower : 1-1/4" angular contact bearing (black seal)
- Stack height 15.6+1=16.6mm
- 74 grams
Heavy duty 3/16" single speed chain great for hardcore street rippers who need the strongest chain possible.
- Extra-wide, for non-derailleur bikes: BMX, cruisers and tricycles
- Compatible with 1/8" x 1/2" single speed set-ups but oversized for extra strength and durabilityLinks (links): 98
- Width: 13.1 mm
- Drivetrain Speeds: Single Speed 1/2" x 3/16"
- Chain Connection Type: Reusable Master Link
- Half Link Chain: No
- Weight: 800g
NEW: Please refer to our chart for the correct adapter size you need.
Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors:
CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup.
The Post Mount standard is universal for front and rear brakes.
Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter.
To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.
If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment.
Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available.
Not currently compatible with TRP 203mm rotors.
If you ride hard, these are the pedals for you. Durable ballistics-grade Nylon will stand up to whatever you're dishing out and keep your cranks spinning through the savage streets. There's a reason these come stock on our city-crushers.
SRAM's Rival 22 Front Derailleur delivers precision shifting with YAW technology. The steel cage with aluminum links ensures strength and durability.
• Yaw cage rotates in line with chain, improving the shifting speed and precision while eliminating the need for shifter trim
• Integrated chain spotter protects your frame, installs and adjusts independently of the derailleur itself
• Precision alignment markings on the cage
• Clamp: braze-on
• Weight: 89g with Chain Spotter
• Waterproof nylon seat cover
• Protect your saddle from dirt and water
• 6/7/8-speed MTB crankset
• Square taper interface
• Coated steel arms/riveted steel chainrings
• Includes plastic chainguard
• Does not include BB
• Weight: 1465 grams
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps.
- Sold individually, includes bolt, washer and nut
Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.40
Hope Pad Clip
- Fits Tech and Tech Evo M4, X2, and V2 Brakes
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.25
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts.
- Fits most standard bottle boss and accessory mounts
- Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch
- 16mm thread length
- Aluminium
- Sold individually
$1.30
Replacement piston and seals for Hope disc brake calipers.
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.70 - $2.79
Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.
$1.90
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models
- Right and Left soft plastic bar plugs.
- Sold as a set only.
- Fits most handlebars.
- Can be trimmed to fit various handlebar thicknesses.
- Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only
- Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.98 - $48.00
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.99
FSA Mega Exo Small Parts.
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
- Top lock nut for threaded headsets
- Includes water seal
- Bag of 10 Lock Nuts
$1.99
RaceFace CINCH Bottom Bracket Spacers
- For use with 30mm CINCH spindle systems
$2.00
FSA Mega Exo Small Parts.
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
- Covers brake hose fitting at the brake lever
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.28 - $2.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$2.42
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$2.49
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
$2.50
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.54
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
$2.95
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables.
- Fits all Greenfield kickstands and most generics
- Made in the USA
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$2.99
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
$2.99
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes
- Model: Front
$2.99
- Oversize 10mm
- Fits new style MTB & BMX levers
- Aluminum construction
Page 1 of 101
Next page