Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Packs/Racks/Baskets

$9.20
By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length
$9.95
The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.
$9.99
Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets. CONSTRUCTION • Aluminum ADDED BENEFIT • Makes the Streamliner rack (sold separately) even more versatile
$9.99
Replacement waterproof liners for Banjo Brothers bags. To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide. - Works only with models 01150, 01150R and 01150W - Welded seams - Not suitable as a stand-alone bag
$9.99
- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"
$9.99
A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size
$9.99 - $19.99
Sticky Pods Utility Packs, Version 4.0, are the practical and durable bike accessory every cyclists must own. First introduced in 2009, the Sticky Pod has received international recognition from North American, Canadian, New Zealand and United Kingdom cyclists. It’s been featured on websites like Bike Rumor and in magazines such as Mountain Bike Action. Road and mountain bike riders all boast how the lightweight, water-resistant pods hold all the essential items needed for short trips or long hauls. Load up the Sticky Pod with spare tubes, CO2 cartridges, multi-tools, patch kits, ID, cash, and cards and still have plenty of space left over for energy gels and chews. The actual utility pack is lightweight and only adds a few grams to the total load. Added benefits are the tools and other stuff won’t poke you in the back, rip expensive jerseys or cause bodily harm in the event of an accident. Features - Mini Dimensions: 4.75" x 3.75" - Small Dimensions: 9" x 4.25" - Large Dimensions: 10" x 4.25" - Fits snuggly into race-fit and women’s jerseys - Grippy (sticky pod) surface keeps it secure in pocket - Weighs just 80 grams - Touchscreen zippered pocket - Three secured zipper mesh pockets Benefits - Prevents tools and keys from wearing through jersey - Protects jersey and any utility pocket from dirty tools and tubes - Eliminates seat bags and pouches (protects carbon seat posts and shorts from Velcro) - PVC cell phone pocket allows for smart phone accessibility while the device remains safe in the secured pocket
$9.99
The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two
$10.00
Metric screws and plastic screws for mounting the upper QL2.1 rail. For all models with the QL2.1 system. CONTENT (FOR ONE PAIR OF BAGS): - 4x metric screws incl. nut washers - 2x self-tapping screws incl. plastic washers
$10.00
The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap
$10.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
$10.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
$10.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
$11.00
Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair
$11.00
For all models with the QL1 or QL2 system. Missing or defective screws or nuts? Get this screw-and-nut set to conveniently replace any defective or missing screws. - 12 screws - 12 plastic nuts
$11.00
Extend the life of your Dummy bags with this replaceable wear patch.
$11.00
Mudgard Bracket for Rear Carriers
$11.95
The simple card wallet keeps your ID visible with a window and two pockets for keeping credit cards organized. Get rid of the lump in your back pocket to make sitting more comfortable, reduce back strain, and foil pickpockets. Made of upcycled bicycle inner tubes, it stretches to hold all you can put in it and returns to its original size when emptied. Materials: - Up-cycled Bicycle Inner Tubes - Up-cycled Clear Vinyl Window - Dimensions: 2.5 H x 4 W x 0.5 D in./63.5 x 101.6 x 12.7 mm - Weight: 1 oz/28 g Features: - Slim design for cards and cash - Clear identification card window - Two main card slots - Built in Colorado - Made in the USA - Limited Lifetime Warranty
$11.95
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
$11.99
- Bike rack RR 290 mm strut kit with hardware - Great for smaller frames - 4 bolts & nuts - 1 set/bag
$12.00
The KEG Storage Vessel allows you to store all key emergency gear—like patches, an extra tube, a micro tool, and a CO2 cartridge—all in one rigid, durable 16oz container that easily fits into any Specialized bottle cage. - 16oz container made from durable, BPA-free PETE Material. - Featuring a "stash cap" on the underside of KEG lid, providing an ideal place to store patch kits. - Printed with non-solvent-based inks (UV Cured), CPSC-approved ink. - Wide 63mm opening makes it easy to place and retrieve items from inside KEG.
$12.00 - $15.00
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
$12.50 - $25.00
Surly Front Rack Hardware
$14.00
For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 18-mm ORTLIEB hooks (cannot be used with inserts). - 2 QL2.1 mounting hooks (18 mm) and adjustable handle
$14.95
Keep small items separate for easy access. With a quick twist, the store-all Duo Pod opens up two waterproof compartments, each ideally sized for keeping both large and small items neatly organized. - Fits in cage - Two waterproof compartments to easily sort items by size. No more mixing nutrition with money or jersey pocket baggies. - Large Chamber: 600mL (20.3 fl oz) fit for repair essentials like a tube, two tire levers, XLAB AirStrike CO2 Cartridges, inflator, tool kit and patch kit. - Small Chamber 83mL (2.8 fl oz): Tucks away smaller items like cash, house keys or salt tablets - Includes rattle-proof microfleece bag to block noise - Deep notch keeps pod secure in cage - Capacity: Upper Compartment Capacity 83mL (2.8 fl oz), Large Chamber 600mL (20.3 fl oz) - Ideal Contents: Cash, House Keys, Salt Tablets, Patch Kit, XLAB Inflator - Lower Compartment Capacity: 600mL (20.3 fl oz) - Ideal Contents: Tube, (2) Tire Levers, 2 XLAB AirStrike CO2 , XLAB Inflator, XLAB Tri Tool Kit, Patch Kit - Weight: 106g (including bag) - Height: 197mm tall - Includes: Pod Container and MIcrofleece Bag - Warranty: 2 Year Limited Warranty
$14.99
- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg
$14.99
The Bungee net is 12?x12? with 4 heavy duty hooks. Made with very durable shock cord material.
$15.00
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
$15.00
The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.
$15.00
For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm